Today, there are also dedicated gateways that connect advanced VRV / VRF and Split HVAC Systems with Home Automation and BMS (Building Management Systems) controllers for centralized control and monitoring, obviating the need to purchase more complex and expensive HVAC systems. Sometimes the BAS is directly controlling the HVAC components.ĭepending on the BAS different interfaces can be used. The system can be scheduled for occupancy or the configuration can be changed from the BAS. The building owner can monitor the system and respond to alarms generated by the system from local or remote locations. More complex HVAC systems can interface to Building Automation System (BAS) to allow the building owners to have more control over the heating or cooling units. With this configurable intelligence in this "brain", we are moving to the concept of building automation. It determines which fans, pumps, and chiller run and at what speed or capacity. It dictates the position of every damper and valve in a system. The DDC system is the "brain" of the HVAC system. This "subsystem" is vital to the performance and basic operation of the overall HVAC system. Groups of DDC controllers, networked or not, form a layer of systems themselves. Digital outputs are typically relay contacts used to start and stop equipment, and analog outputs are typically voltage or current signals to control the movement of the medium (air/water/steam) control devices such as valves, dampers, and motors. Digital inputs are typically (dry) contacts from a control device, and analog inputs are typically a voltage or current measurement from a variable (temperature, humidity, velocity, or pressure) sensing device. The unit controllers typically have analog and digital inputs that allow measurement of the variable (temperature, humidity, or pressure) and analog and digital outputs for control of the transport medium (hot/cold water and/or steam). The program features include time schedules, set points, controllers, logic, timers, trend logs, and alarms. start the blower).Ĭentral controllers and most terminal unit controllers are programmable, meaning the direct digital control program code may be customized for the intended use. Then the control system draws a conclusion what action has to be taken (e.g. Usually a sensing device is used to compare the actual state (e.g. HVAC (Heating, Ventilation and Air Conditioning) equipment needs a control system to regulate the operation of a heating and/or air conditioning system. Control system for heating, ventilation, and air conditioning equipment
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |